Hello everyone, this is Miya. In today's video, I want to unpack a wireless Bluetooth microphone for everyone. In fact, I think most bloggers may be like me, and bloggers who record videos at home will have a problem because they are in the home. People are more complicated, but there is no way to control who will turn on the TV, who will turn on the washing machine, including the sound of turning on the air conditioner in summer, but it may be recorded in a video, but it is impossible to record these noises in a video. I need to re-record the last video and then repeat it a few times, it will really affect the mood of the recording, and the quality of this video must have declined. I am not a full-time blogger, and I cannot say that I want to rent it outside. It is impossible to use a house exclusively for video recording, and even if you really rent a house, there is no way you can avoid it. Some people in the community are renovating it, or the sound of walking upstairs and downstairs is very loud, including summer. There may be no solution for the sound of the air conditioner, so I think the relatively cheaper solution is to buy a wireless microphone like this. So I bought a wireless microphone like this now. Open the box and then let's try it together. How about this microphone? This is the wireless bluetooth microphone I bought and its brand is this LENSGO Lang poetry and then I bought a one-for-one black one because I think black looks better, its model is this 348C, open it and take a look I bought a one-for-one, so it is a microphone and a transmitter. He should also be able to put it in two groups and put one more group here. It can be directly matched with one of the microphones and then stored together. I think he has this storage. The box is pretty good. The storage box is pretty good because it is exactly the same as this microphone, and even the button is perfect because some merchants on his side may do it directly. This is not him, this red dot is still separated from this black circle outside, it is very real, including the position of the light, it is very real, and then the microphone and the receiver can be directly placed on the Then use this shell to charge it, then it should be able to charge the microphone alone, and then look at this manual. It has a magnetic suction like this one with a sticker on the back, but I don't know where this should be posted temporarily. I don't know yet (do you know? Please tell) and then this is the three wires. This wire should be a charging wire. This is a type c charging wire and this is the one that connects the transmitter and the camera. Then if you If it is connected to the computer, it is also used this line. This line is the microphone and then connected to the mobile phone, and then it is the audio head. If you are an Android phone, you have to get one for the audio and then switch to the type c one. If it is an Apple phone If you want to get a switch to the lighting interface and then directly plug the microphone into the phone, what if you plug the microphone directly into the phone, then you can directly use the microphone and record video or something? The clip fits the hot shoe mount and I can insert it directly (it's not easy to operate with one hand and I didn't fully insert it) but on a camera like the A6400, the flip screen is turned up so if you don't want to block the flip The screen can be clipped on the bag of the camera. The clip is magnetically designed and can be rotated 360 degrees, so you can find a better radio angle You can skip this paragraph to 8:25 seconds and find such a hole directly on the camera Insert it into it. I can't handle it with one hand. I just insert it directly, and then insert the other end into the hole of the receiver. Then insert this hole into this hole, and because it is like my camera, it is Is it flipped up so I don't plug it into the hot-blood interface, I just put it on the clip and then clip the clip on the camera strap and then suck the receiver up and plug the wire in and just assume he It's plugged in first because it's hard to get one hand right now, then turn it on over here, he's him now, these two are showing two mics, but because now I only have one mic, and what he shows now is that my current mic is still there. It's not connected because my mic hasn't been turned on yet. I'll turn on the mic now. Now you can see that the receiver shows that the power of the mic is 2 bars and the signal is 3 bars. He has the mic. The display indicates that it has been connected, and if your green light is flashing, it means that he is not connected. If it is not flashing, it means that it is normally paired. If this microphone has a TF card slot, then Because sometimes you may record very important things, and you will be afraid of losing the audio. Put a TF card in it, that is, the microphone will be recorded in the camera and in the TF card, and then a copy will be recorded to ensure that This audio is just in case it is lost, but I don't think it is necessary in general, so I didn't insert the card and there is a rec button on his side, which means that if you want to record, then it is not recorded in the camera, just alone If you use this microphone to record, you have to press the rec button to turn red, and then the audio recorded by him is also stored in the tf card, but if I record normally, this button does not need to be turned on, just turn on this The power supply and the receiver are all paired normally, they are already using this microphone for recording, not using the built-in microphone of the camera. He also has a very good function, which may be that the video master may not use it. Most of the live broadcast rooms may be used more, that is, when you live broadcast and then you may need to communicate with the assistant privately or privately. When your voice does not want to be broadcast, you can press the button lightly. Press the power button here, and when the blue light is flashing, the microphone is off. When it is closed, the audio is closed and the sound will not be transmitted. After you have finished communicating, you press it again and it will recover. It is very convenient to use in the live broadcast room. Then I will use this microphone now. Put it on and try it out. Hey, hey, I have successfully connected it now. I should put the microphone on first. Oh, this suction iron is to be placed outside. It seems that ordinary bloggers wear it on the collar side, but my collar seems to be a little too high. Let's try it first. Suddenly, I feel like I have become a professional. This wireless request seems to be the standard of professional bloggers. I feel like I have a little prestige when I speak. In fact, the voice I speak now is similar to the voice I usually talk to my friends outside. In fact, the voice I speak myself is I think it will be better than ordinary people. Be quiet because I'm the kind of person who has a very small voice, but I can clearly see that the volume in the video I recorded in the camera is already there, and the volume bar will explode and turn red. So in fact, my volume can be turned down a little bit. Let me take a look at him. It seems to be turned down a bit in the front. In fact, it still has a little burst , so it should be much better (in fact, it still burst, first Inexperienced times) So in fact, this microphone first solves a problem that my voice is relatively small, because if I use the built-in microphone of this camera, in fact, I want to record to guarantee the volume. Under the premise that I need to speak The voice is much louder than I usually speak. Even if the video is recorded more times, it will be repeated more times or the video is recorded for a long time. In fact, my voice will break in the end. This is the problem. The microphone can be completely solved because it is on the side of the mouth, so his sensitivity is higher than that of the microphone, so in fact, as long as I promise to speak softly, he has already recorded it very well. It's inside and I'm setting the mic to 1 right now, he seems to be able to reduce it further - 1-2-3 I'm setting it to 1 now I'm going to stand in the back and try it because I usually have Sometimes when I record some outfit videos or unboxing videos, I will need to walk around or stand behind to show something, but in this case, the sound will actually be far and near, and the audience will feel a little more uncomfortable. Sometimes even if I walk a little farther, I may need to shout loudly so that the camera can record my voice so that I can clearly hear what I am saying, but this is actually quite I'm tired, so I'm going to try it now. If I wear this microphone, the effect will be much better. Like I usually record videos of this kind of outfit or unboxing, it's probably so far away from the camera. Then you guys actually It can be clearly felt that after I put on the microphone, when I am close to the camera and when it is so far away, my sound quality, including the volume, is maintained at an average level. Because if I usually use the built-in microphone of the camera, it may include some directional microphones. Maybe when I am close, the volume will be louder, and when I am far away, the volume will be relatively small, and it will be relatively small. Some so actually say this as the viewer, he may turn on the volume now and listen to you, but suddenly when you walk away, maybe he needs to keep turning the volume up, it's not so good, it's just watching the movie Let's experience it. Like some bloggers, like digital bloggers, he may show something bigger. Maybe he needs to go further. Suppose that I am showing a TV, then my picture may be reserved for The TV, so I have to go a little further. In fact, it is the same if I go further like this. I remember that the microphone can be recorded normally within 70 meters, but I don’t think it is practical in general. 70 meters because if it is really 70 meters, it means that I am in such a small spot in the camera, and it is useless. If you want to show it like I usually do, like this is a new cart I bought from IKEA, but including this cart In fact, if it's so far away, you can't see any details. It's just a general outline. If I want to show him, I may need to zoom in to about this range, maybe a little bit in front of you, so you can see the details of this cart, so I think this microphone It's actually very, very enough and very suitable for normal use. One thing about this bluetooth microphone that I really feel particularly satisfied with is the buckle of his windproof sweater because there are some bluetooth microphones. One of the positions of a buckle that is so small is that the hair is very easy to fall off, but this is different. The buckle is very large. It goes from here to here and the card is very tight. Now I will take it apart for you to take a look at. And there is a groove on this side, and a groove on this side, and the whole buckle is so long, so I don't have to worry about it falling off. One side is inserted first, and then the other side is clicked lightly and it snaps in. I think this design is really super good, so I will never worry about this hairy loss of the noise reduction capability of this microphone. I'm still quite satisfied. In fact, from the very beginning of the video, you can hear that I was in a state without a microphone. If there is a background sound in the video, there will be some humming sounds. In fact, those sounds include our community. Someone renovated and added the sound of the air conditioner, but when I put this microphone on, my background sound didn't actually have that humming sound, so in fact, it can block most of the noise, but it's like me If the family speaks loudly, he can't block these voices because he is still a microphone after all, and it is impossible for him to block those voices because if he can block the voices, he can't record my voice. After entering, the video sharing of today's microphone is here. If you like my video, remember to follow me channel yo see you next video bye